5 mistaken views for car charger

Car charger for mobile phone

Nowadays, car charging is easy for some people in the car, because the most models are equipped with a USB charging port or cigarette lighter to charge. But, do you know that it is far from being as simple as plugging and unplugging? Now, let us tell you about the things you need know about car charger!

USB port

1.It need not use car charger when there is a USB interface on the car.

Many people think that the USB port on the car can be plugged directly to charge.However, it is wrong!

Since most of the USB ports in the car are set for audio data transmission, most of the vehicle’s interface current is only 5V / 0.5A. At this case, if the current is not reached to the standard of charge, your equipment will be a degree of damaged.

2ports for car charger

2.Charging current must be enough big”

What does it mean? Simply put: the current output of the car charger must greater than the maximum rated input power of the cell phone.

For example, an car charge with output 5v/2.1A, it use for mobile phone(maximum rated input power 5V/1A) to charge, which is 1A for the phone, and if using for tablet(maximum rated input power 5V/2A),  2A will use for the tablet, and it will be completed in a shorter time and the battery is fully charged. But if output charge current is 5V/0.5A for the same mobile phone, the input is 0.5A, that is not very slow, and it will be severely hot and damage the mobile phone battery for a long time.

After understanding this, you need to buy a car charger with a high output and high quality. Don’t smash mobile phone because of unqualified car charger.

1 usb port

3.Be sure to take out the car charger after the car is turned off, otherwise it will damage the battery of car.

The battery of car will be damaged if you often did not remove the car charger after the vehicle is turned off. Ordinary family car vehicles will be powered off after the flameout. Even if the special model is not powered off after the flameout, It has not a current output or  have no effect on the battery if the charger is not connected to the charging device.

Car charger with Cigar Lighter

4.More USB ports, slower charging

Normally, the speed of charging depends on the voltage and not on the number of connected devices.

mobile phone

5.After charging with USB port, the electric quantity is not rise, instead of fall.

Some people are used to charging the phone while navigating,  it may be happen above case. Originally, most of the car’s USB interface was designed to transmit data. Although it was shown to be charging after connecting with phone, but the current was only about 0.5A.

When you are listening to a song or navigating with a mobile phone, the consumed amount of power consumed is actually greater than the amount of charge. Therefore, there will be no rise, instead of fall.

Therefore, when choosing a car charger, we should pay attention to the following 3 points:

First, we must choose car charge with with overload protection function.

second, choose the product with output current above 1A.

Third, it is also important to choose a regular manufacturer !

Posted in Car charger | Tagged , , | 2 Comments

iGO World 9.18.27.736653 for android 8.0 and upwards

NNG igo navigation android verison — iGO World 9.18.27.736653 for android 8.0 and upward system

iGO World 9.18.27.736653 – 19.jun.2018 > DISCUSSION
iGO World 9.18.27.736653 SD … mod

APK name: iGO World
Package name: com.nng.igo.primong.igoworld
Data folder: “iGO_World”

NNG igo navigation version for android OS

NNG igo navigation version

iGO Navigation is a navigation and maps application for Android the development of which has focused on avoiding any kind of distraction for the user
by car or using any other means of transport, iGO Navigation is a GPS application with which you’ll always find the best route to your destination. Its development is focused on avoiding any sort of distraction whilst we always go in the right direction, whether in your hometown or when on holidays thousands of miles away.

Maps from over 100 countries all over the world, join millions of travelers around the world and take the journeys that matter.
The application takes up less space than other GPS navigation apps(almost using half the storage space of many other navigation apps)  and includes data such as maps and routes in over 100 countries across the 5 continents. iGO Navigation is an offline app that guides you on adventures around the world. Including only the features that help you the most, we do away with distractions – just you and the world around you, because we believe that travel should be experienced between the traveler and the world, not the traveler and their phone.

The iGO Navigation app is for those who believe in a purer form of discovery, but want a helpful guide to push them in the right direction, whether you’re traveling in your hometown, a new country, or across a continent. The award-winning, full-service app now has improved visualization, accelerated route calculation, reduced storage space requirements, and advanced offline features, making it the best copilot to help you experience the world around you.

Find your inner explorer, and hit the road like a pro. No more getting lost, no more wasting time, no more clogging your phone, no more searching for WiFi, and no more distractions. iGO Navigation: for the journeys that matter.

What does iGO Navigation offer?

These are its main features:

1.Maps for more than 100 countries including the USA, Canada, Mexico, Spain, Italy, France, Germany, Australia, New Zealand, India, and more.(Details as this link: )
2.Space storage demands are much lower than other navigation and map apps. Half the storage space compared to many other navigation apps, saving room for more important travel necessities, such as photos, videos, and music
3.Options to calculate multiple and quick routes. Fast and diverse route calculation options to find the best route possible

4.POIs to help you find restaurants, bars, landmarks, malls, stores, and more
5.3D city maps with waypoints.3D landmarks and 3D city maps for clarity and easy-to-process visualization

6.Offline reliability to keep you on track, be it in a crowded city or remote backcountry
7.Precise location in places that are hard to find as well as those places in which the numbering isn’t sequential. Point addressing to accurately pinpoint hard-to-find locations and to navigate in places that follow non-sequential numbering or don’t have address numbering at all
8.View the entrance and exit of junctions on main roads.
9. Step-by-step voice indications. Advanced Text-To-Speech for hands-free and turn-by-turn directions
Download the APK of iGO right now and get hold of one of the best navigators for your routes and trips

Review: After our installation testing, comparing with the previous igo primo version software, this version of the software features more, more suitable for the current high-definition large-screen in dash car navigation system.

Posted in Car DVD Player, Navigation map software, Portable handheld gps device | Tagged | Leave a comment

Auto IGO Navigation map software-file format introduction

Recently, for Auto igo map software, we received some questions on file format from some customers, now we list them for reference as below;

–> the directory *\content\building\
3dl/3dc –> 3D view Landmarks/Building
petrol.3dl – 3D view of Petrol stations

–> the directory *\content\dem\
dem –> Landscape view

–> the directory *\content\histspeed\
hsp –> Smart route, allows to avoid traffic on certain hours => only Becker Primo and recent Primo, about same function as fsp (go in map folder)

–> the directory *\content\map\
fbl –> Maps
fda –> Driver Alerts (Primo only)
fjv –> junction views
fjw –> newer version of fjv (Primo only)
fpa –> Address points (house numbers) (Primo only)
fsp –> Smart route (about same as hsp files that go in histspeed folder) historical traffic data in relation to time and day of the week. Therefore the route calculation may differ depending on the time of day (to avoid daily traffic jams) (Primo only)
ftr –> Truck Info
hnr –> predefined calculated routing for ‘short’, ‘fast’, ‘easy’, ‘economical’ (Primo only)

–>\content\userdata\poi\
kml –> Custom POI

–>\content\userdata\usericon\
bmp – Custom POI icons

Secret tip : To use hnr one needs the complete map set unless in sys.txt:

[Route]
hnr_ignored_missing_country_ids=*

–> the directory *\content\phoneme\
phr/ph –> Pronouncing local names (for TTS) (phonetical files)

–> the directory *\content\poi\
poi –> Points of Interest

–> the directory *\content\speedcam\
txt –> Speedcams
spc –> Speedcams (Primo only)

–> the directory *\content\userdata\poi\
kml –> Custom Points of Interest
—————————————————————————————
Code:
FTR> Truck Info > /Content/MAP
FPA> Point addressing > /Content/MAP
FDA> Driver Alerts > /Content/MAP
FBL> Actual Maps > /Content/MAP
HNR> Defined Routes > /Content/MAP
3DC> 3D Buildings > /Content/Building
3DL> 3D Landmarks > /Content/Building
PHR or PH> Reporting street names > /Content/Phoneme
DEM> Landscape > /Content/DEM
POI> Points of Interest > /Content/POI
FJV> Junction view > /Content/MAP
KML> Custom Points of Interest > /Content/Userdata/POI
SPE> Speed camera files > Content\Speedcam
SPC – Speed Camera files – Content/speedcam
SKIN>[HIDE]SKINS >Content\skin
UX ADDONs> iGO\ux or SDcard\iGO\ux
Speedcam.txt> Speed camera files > Content/Speedcam
SpeedcamUpdates.spud> Speed camera files > Content/Speedcam
FSP (File .Speed.Profiles).Content\MAP.
FDS dangerous curve alerts, upcoming sharp curves. Content\MAP – Nextgen,Becker only. (info here post #37 )

NOTE:
FJV -> for iGO Primo any platform (WINCE, Android, etc.)
FJW -> iGO NextGen for any platform (WINCE, Android)

If you have any other questions, please contact our support via email support@car-gpsdvd.com

Posted in Navigation map software | Leave a comment

Using a handheld GPS Device without Internet Data

Using a handheld GPS Device without Internet Data

You have your Android Portable Handheld GPS device and you intend using it. Of course, with WIFI, you can use it to do almost anything, but the moment you step away from the connection, there is no data for GPS. It is a normal thing for maps and voice guidance not to work without data.

Well, there is certainly a solution to this challenge. Well, it known that offline maps are installed on the SD card, therefore you do not need an internet connection for navigation. Once it is installed, you just need to download the turn by turn voice guide in your own language.

One popular map that you can use if you want to travel is Google maps. This app usually is on every device with an Android OS and so you have the chance to save the particulars are zoomed in the map when you are traveling. Google allows you save about 6 large map areas when using it offline. All you have to be sure of is that you have saved the maps for offline use. You would have used WIFI connection to start the GPS and when the device would have gathered enough information, it can guide you properly to your destination even if you do not have internet connection during that period. However, there are cases of Google maps not properly navigating one to their destination if it wasn’t started when connected to data or WIFI. In such cases, you should start the navigation process at home when connected to data or WIFI and then take your device to your car.

There are other apps that can do this as well such as the iGO primo app. This app allows you navigate without data or WIFI connection. It is a GPS Navigation app with street view and offline map which properly guides you without the connecting to the internet since the maps are saved to the internal storage in the portable GPS device or its SD card. You have the opportunity to download maps needed for your trip alone. This will prevent your device memory from getting filled up quickly while making use of your device. There is the option of downloading the maps needed at any time and deleting the unused ones.

 

Features of the 7-inch Android Portable Handheld GPS Device

It comes as a 7-inch GPS navigation Android pad with a 5 points capacitive touch screen of 800 by 400 pixels. Having an ARM CPU of 1.3GHz, its RAM size is 512 MB and a flash memory space of 8GB which can be expanded to 16GB. Its Android OS is version 4.4.2 with the GPS module a built-in main chip and built-in high sensitive antenna, and it has a pre-installed map software to make it perform its primary function.

Apart from the primary navigation function, the tab can be used below functions:

  1. to play games as it supports all types of games;
  2. it can play music;
  3. used for reading e-books;
  4. can be used to watch videos;
  5. and has an FM transmitter;
  6. It also has a camera with flash;

vehicle power charger with it a built-in battery of 1500mAH Li-ion battery which can be charged with a 120/230V adapter charger.

This device can serve multiple functions and still work as a GPS navigation device. It promises to be a companion to its owner and will do almost anything to please the owner. The 7-inch Android Portable Handheld GPS Device is a hot cake in the market and anybody who travels frequently should have one with him always, for a smooth journey to his or her destination.

Posted in Navigation map software, Portable handheld gps device | Leave a comment

Everything about GPS System

Everything about GPS System

What is GPS?

GPS is the acronym for Global Positioning System which is a satellite-based navigation system comprising of about 24 satellites. It is able to work under any weather conditions, in any part of the world, throughout the day without subscription or setup charges. Satellites are put into orbit for military use by the U.S. Department of Defense (USDOD) although they were available for civilian use in the 80s.

 

How GPS works

GPS satellites usually revolve around the Earth two times a day in a particular orbit with each satellite transmitting unique and orbital parameters allowing GPS devices decode and calculate the precise location of the satellite. This information and trilateration are used by receivers for calculating their exact location. In short, the receiver measures the distance to each satellite by the amount of time a transmitted signal is received. The receiver is able to determine a user’s position and display it electronically with distance measurements from some more satellites.

If you are trying to calculate your 2-D position (i.e. longitude and latitude) and track movement, the GPS receiver has to be locked onto at least 3 satellites’ signals. To determine your 3-D position (i.e. longitude, latitude, and altitude), 4 or more satellites would be needed. A GPS receiver normally can track 8 or more satellite but this depends on which time of the day and your location on the earth.

When your position is determined, the GPS unit will be able to calculate other information like Sunrise and sunset, distance to your destination, trip distance, track, bearing, and speed.

 

Accuracy of GPS

GPS receivers of today are very accurate due to their parallel multi-channel design. Receivers lock onto satellites quickly when the device is turned on and maintain a tracking lock in dense tree cover or in urban settings with tall buildings.  The accuracy of GPS receivers can be affected by factors like weather and other error sources.

 

What’s the signal?

GPS satellites transmit a minimum of 2 low-power radio signals which travel by line of sight which means they can pass through clouds, plastic, and glass but won’t go through most solid objects like mountains and buildings. However, there are modern receivers that can track through houses because they are more sensitive.

There are 3 types of information that a GPS signal has:

  1. Almanac data – this tells the GPS receiver where each of the GPS satellite should be at any time of the day and shows the orbital information of the satellite and other satellite in the system.
  2. Ephemeris data – this is used for determining a satellite’s position and gives vital information about a satellite’s health, current time and date.
  3. Pseudorandom code – this is an I.D. code for identifying which satellite is transmitting information. You get to see which of the satellites you are getting their signals on your device’s satellite page.

 

GPS Signal Error Sources

There are several factors that affect the signal and accuracy of GPS which include:

  1. Satellite Geometry/shading – Signals of satellites are more effective whenever the satellites are at wide angles relative to each other instead of in a line or tight grouping.
  2. Orbital errors – The satellites reported may not be relatively accurate.
  3. Signal multipath – GPS signals may reflect off solid objects like tall buildings or large mountains before it gets to the receiver which increases its travel time and may cause errors.
  4. Receiver clock errors – The built-in clock of a receiver may have a slight timing error because it is not totally accurate than the atomic clocks on GPS satellites.
  5. Ionosphere and troposphere delays – Satellite signals slow down when they pass through the atmosphere. However, the GPS system has a built-in model which corrects this error partially.
  6. Number of visible satellite – The accuracy of the receiver depends on a higher number of satellites it sees. If a signal is blocked you may get position errors or even no position reading at all. Normally, GPS units do not work underground or underwater but receivers of today which are high-sensitivity can track some signals in such places.
Posted in News, Portable handheld gps device | Leave a comment

How to get better accuracy for your handheld GPS device?

how to get better accuracy for GPS

Inexpensive handheld GPS receivers are of great use to any person who likes outdoor activities. However, there are several factors affecting their accuracy and we will look into the necessary steps that will help you achieve better accuracy with the handheld GPS receiver.

 

First method: Improving positioning

  1. Check the owner’s manual to know the type of antenna your GPS has

Antenna positioning is very important for accuracy, therefore, it is necessary to understand the type of antenna your GPS device has. Usually, there are two types – patch and quadrifilar helix antennas. While one is built into the device, there other is external so make sure you point the antenna (irrespective of the type) to the sky.

  1. Move away from any form of obstructions

For the fact that GPS relies heavily on satellite data, it is very important to ensure there are no obstructions between the signal and your device. When you are trying to lock down your position with your device, ensure you are away from skyscraper, tunnel, deep valley and other artificial obstructions which can block or reflect the signal, thus altering its accuracy. The aim is for your device to be in view of as many satellites at once as possible as well as getting a clear signal.

  1. Orient the patch antenna well

There are several designs given to GPS antennas which would give you a good signal from a particular positioning. The chances are that you have a patch antenna in your receiver (this can be confirmed from the manual). To get the best signal, it is ideal to hold your GPS flat with a patch antenna.

  1. Orient the quadrifilar helix antenna

If your antenna type is the quadrifilar helix antenna, then you need to hold your GPS erect.

  1. Move away from under cross wires net

It will happen electromagnetic shielding if you are standing under cross wiress net, then your gps device will not receive any satellite signal. So it is ideal to let your device away from cross wire net, usually, 3 meter is ok for gps device.

  1. Turn and face different directions

Whenever you are in an open field with your handheld GPS device properly positioned, the only way to improve accuracy is turning and facing various directions so as to increase the number of satellites in view. The higher the number of satellites “seeing” your device the better and faster your GPS receiver provides accurate information.

 

 

Second Method: Using Averaging

  1. Put on “position averaging”

With this feature, your GPS can take measurements about once every second and therefore calculate an average position before it is saved in the receiver’s memory of the GPS device. It is essential especially if you are pinpointing a particular location. Three minutes of averaging is enough to provide sufficient measurements for improving your position’s accuracy.

  1. Adjust average setting in order to get more points

If you are within an obstructed location, you will need more data for pinpointing your location more accurately. Therefore, if your device is collecting just 2-3 points (coordinates), it is better to set it to 20. The longer you stay still and gather more data, the better the accuracy.

  1. Make sure to stand still during the averaging

If you are moving too fast while collecting points, then your accuracy could get worse. If you are standing under a tree canopy or in any other location with obstruction, then be patient enough to get more data in order for your reading position to be accurate.

  1. Use manual waypoint averaging

Instead of making use of an averaging feature on your device, you can record your waypoint (i.e. your fixed position) coordinates during the course of several days and average them by adding up the last numbers of the coordinates your recorded and dividing by the total number of readings (the times you recorded all the coordinates).

Posted in Portable handheld gps device | Leave a comment

What is sygic android app for car?

Sygic android gps navigation app for carCar Sygic GPS navigation app for android is the world’s most installed offline GPS navi software with real-time traffic for Android with free 3D offline maps from TomTom. It offers the most accurate real-time traffic information with data collected from 500 million users world-wide, provided by global automotive, mobile operators, mapping & traffic information suppliers.And it is specially optimized to work with your car’s built-in car multimedia system with satellite navigation. It is fast, easy and seamless. Just connect your to the car’s GPS antenna, and then you are ready to hit the road.

Sygic app systems work on android mobile phones, tablets and in-dash car radio player with GPS and use screen and audio signals to provide door-to-door information for well-oriented travel, live traffic & police radar/speed camera warnings, parking place and gas prices suggestions.
Sygic GPS navigation is all-round full featured application that focuses on its wide usability.It can be used both online and offline, runs on GPS device with android operating systems, offers maps for more than 200 countries in the world and operates in more than 30 languages.
Sygic navigation uses 2D & 3D maps from TomTom for both online and offline use. While many leading GPS and mapping app providers work fully only connected to internet, Sygic focuses on both online and offline use.At the end of 2015 Google Maps announced its new offline functionality,but with various limitations – downloaded area cannot exceed 120,000 square kilometres and require considerable amount of storage space.
Users of Sygic GPS navigation can download maps to their GPS devices and use them in situations when they need navigation but have no internet connection. Sygic optimizes data download sizes to allow users to use maps offline while using the minimum amount of memory on their devices. “With the Sygic GPS Navigation app, downloading the whole state of California takes up 330 MB. This 330 MB includes complete street coverage, all the data necessary for turn-by-turn navigation, information about points of interest, as well as landmarks and 3D terrain for easy orientation.”
Sygic delivers its GPS software worldwide in more than 30 languages, including Chinese, Arabic, Persian, Greek, Russian and many European languages. In 2016 Sygic created a translation project on Crowdin “dedicated to localization of Sygic app to all languages”.The project is open to public that can contribute to localization to Catalan, Urdu, Persian, Malay, Tamil, Latvian and other languages.
Real-time traffic information is based on TomTom Traffic. Traffic information is collected from more than 400 million automobile drivers and updated every 2 minutes. “GPS data is collected from connected personal navigation devices (PNDs), commercial fleet GPS devices, mobile phone signals, road sensors, journalistic data, smartphones and car dashboard systems.” Users do not report anything – the data is collected automatically and anonymously.

Posted in Navigation map software, Portable handheld gps device | Leave a comment

What is igo primo maps for car?

iGO GPS navigation map for car

iGO Primo map software for car GPS navigation system

The Car iGO Navigation software, developed by Hungary-based NNG LLC (formerly Nav N Go) is a GPS navigation software package. IGO Car Navigation is specially optimized to work with car’s built-in infotainment system. It is fast, easy and seamless. Just connect gps device to the car’s dashboard system with a USB cable, and you are ready to hit the road. NNG supply some versions of the software(IGO8, IGO Primo, IGO my way) directly to users, as well as to device manufacturers, auto makers, network operators and professional transport specialists.
Usually,IGO maps have below features:

1.Different Routing Options
No more nasty surprises.Our routing is among the most consistent on the market!Select the best route accoring to your preferences and vehicle profile, and then compare the route alternatives!Fast,easy,green – whatever you prefer.

Route Summary

2.Traffic is not a problem
when you’re online,we provide up-to-date trafic information and recommend detour options if trafic escalates unexpectedly.When you’re offline,historical(statistical) traffic data is considered when calculating your route.

Current Traffic Map

3.Realistic visualization
Amazing 3-dimensional imagery helps you better understand your surroundings.Detailed landmarks and city models act as reliable points of reference and accurate depictions of lanes,tunnels and complex junctions make the world around you easier to navigate and understand.

Select As Destination

4.Guidance everywhere
We help you navigate a labyrinth of lanes, roads,signposts,and junctions with precise maneuver instructions.This way,you’ll never be caught off guard.But for the inevitable surprise or mistake, we instantly recalculate your route and get you back on track.

Cross Bronx Expy

5.Search like a pro
Simply search for addresses or among thousands of points of interest,including cafes,musems,bars,restaurants,gas stations, and many more along the route!Only know part of the address?We’ll help you figure out the rest!You can search online when network connection is available.

New Route to

6.Trucking made easy
Trucking made easy! This feature will help you when you are on the road with a truck or caravan by guiding you through the aspects of the road network designed for truck.

Vechicle Profile

Posted in Car DVD Player, Navigation map software | Leave a comment

7 Benefits of Installing a GPS Navigation System in Your Car

Getting your car fitted with GPS navigation system is a sensible idea. It is indeed a need rather than a luxury. Fitting GPS navigation makes it easy for you to locate fuel refilling station, finding a bank and the like while you are traveling. At times, it would be an invaluable company when you are thrown desolate and are in need of help.

The GPS navigation system can make your traveling in car more convenient. Following are some benefits provided by this system.

1.Travel easily in new places


While traveling to new places, either on a vacation or on a business purpose, there is a great probability of you being in a place you are not so familiar with. In the event you want to know where your destination is, having GPS navigation in the car would be of great help. This would conserve your valuable time, fuel and effort. Further, if you feel you are lost, it will help you. Thus, you can ensure that you do not lose path to your destination and waste time and fuel in tracing it.

2.Choose traffic free routes


Of late, traffic snarls have become so common that they are taken for granted, especially in large metropolitan cities, notwithstanding the proactive measures like increased surveillance and better traffic management using technology as well as labor. While part of the city is congested with traffic, a part may have a low traffic density. GPS navigation system you with the current situation at any locality and thus helps you spot areas with less traffic so that you can reach your destination hassle free.

3.Save fuel


While driving long distances, one of the primary considerations is conserving fuel. To save fuel, you should minimize its wastage. You waste considerable amount of fuel in searching a location, or following a wrong route, or the one with traffic hurdles. Having GPS device in your car, would rule out all this by locating your desired destination and showing the right route. GPS system provides options which lets you set goals in the device such as driving by the shortest route, a route with leanest traffic and the like, that help you conserve fuel.

4.Plan your travel by estimating the time


Another important consideration while driving is time. Using GPS installed in your car, you can plan your travel program. This system lets you determine the time you need to set for the travel program by helping you to know the distance between the places you traverse, and the routes that save your time like the ones with less traffic, and with convenient amenities. Thus, this makes your trip more beneficial and enjoyable.

5.Easy to trace routes when you are lost somewhere


The principle feature of GPS system to stand functional at any location across the globe helps you trace out the route to your destination in case you are lost on your journey. It locates you using the satellite communication system. This device fitted in your car will help you know where you are and through which route you can reach your destination.

6.Easy to trace your car in case of theft
A GPS device, when fitted in to a car will make it easy to trace it in case it is stolen. The car can be located exactly using satellite and GPS signal receiving aids. This helps police and other law enforcement agencies locate your car.

7.Save insurance cost


For cars having GPS installed at the time of purchase or later, certain insurance companies offer insurance at a reduced premium. This is because the risk of not being traced in the event of theft of the car considerably reduces. Thus, you get your car insurance for lower price. It would help you in the long run save on paying insurance costs.

You may have to invest some money to install a GPS navigation system initially, but the benefits you get from it are manifold. Thus, you should indeed consider getting it installed in your car if you do not have one.

LoCi is your one stop shop for all your car electronics needs. Whether you are looking for a Car kit or a car electronics, we are here to help you. We carry mobile electronics, audio products and accessories including GPS navigation systems at discount prices. We also carry a full line of installation accessories including iPad chargers, dash kits, and more to make your equipment fit and work properly.

Posted in Car DVD Player, Navigation map software, Portable handheld gps device | Leave a comment

How to Improve Driving Safety and Convenience Via Car Alarms, GPS, and More

When you want top-notch safety features and convenience for your car, a mobile car electronics expert can help you. Find out how these pros can add features like an integrated GPS navigation system or a backup camera to make your car even safer than it is already.

Usually, we spend a lot of time looking for the car that’s exactly right for us. But, sometimes, we compromise on a feature here or there in order to stay within a certain budget, or because the features we’re looking for simply aren’t available in the cars we are considering. Mobile car electronics pros are familiar with these situations and can help you get the vehicle of your dreams by adding on features that your car lacks. Find out how your local mobile car electronics expert can help improve your car’s safety and its functionality. Whether you want an in-dash car navigation GPS to make business travel easier or a remote starter to simplify your morning commute, your area mobile electronics specialist is available to assist you.

In some cases, adding mobile electronics components to your car is a way to make your life a little easier. Take a remote starter, for example. This is a device that allows you to start your car from afar with the click of a button. To some people, this sounds like overkill. However, for anyone who lives in a chilly climate and has to remember to go outside to start the car well before they need to leave, a remote starter is a very good idea. Instead of bundling up, going outside, then going back inside to finish getting ready, you can complete that job with one little click. A remote starter is one of the many mobile electronics devices that help your car work better for you.

GPS satellite Navigation systems also fall into this category. How many times have you gotten into the car only to realize that you have forgotten to get directions to where you’re going? Even if you have directions, trying to read a map or follow a written list of where to turn, what road to look for, and how far to go is difficult and potentially dangerous, since it takes your eyes away from the road. In-dash GPS systems eliminate the need to memorize or follow complicated directions off a piece of paper. Instead, you can glance down to your dashboard to see where to go next or follow voice prompts that help keep you on track. Not only is this a more convenient way to travel, but, as discussed, it can also contribute to your overall safety when you’re in the car.

Like a navigation system, a reverse camera also functions as both a convenience- and safety-oriented feature. Many vehicles these days are very large and are difficult to see behind. Reverse cameras help make these, or any vehicle, much safer on the road, since they allow drivers to see what’s behind them easily and clearly. This makes backing up simpler and makes the process safer when parking car for everyone.

Car backup camera

Parking sensor system is another one car electronics device that can be used for parking car.They are proximity sensors for road vehicles designed to alert the driver to obstacles while parking. These systems use either electromagnetic or ultrasonic sensors. Help to prevent dangerous and costly collisions, enhance the safety features.And it help to provide increased safety for passengers, pedestrians and family members who happen to be around the moving vehicle.

A car alarm is another aftermarket mobile electronics device that can be considered a safety feature. When you park, there’s only so much you can do to ensure your vehicle’s safety while you’re away. You can park correctly and you can choose a well-lit or familiar area, but that’s about it. A car alarm essentially takes over for you safety-wise while you’re gone. If someone tries to damage or abscond with the car (or anything in it), the alarm will go off. This alerts you, and anyone else around, that there’s a problem, and, in many cases, will spook and scare off the intruder.

Car TPMS(tire-pressure monitoring system) is an car electronic system designed to monitor the air pressure inside the pneumatic tires on various types of vehicles. TPMS report real-time tire-pressure information to the driver of the vehicle, either via a gauge, a pictogram display, or a simple low-pressure warning light. TPMS are provided both at an OEM (factory) level as well as an aftermarket solution. Its target is prevent puncture and damage of car parts caused by the flat tire. Improve fuel efficiency, prolong tire life, increase traffic safety and avoid abnormal wear of vehicle parts.LCD screen displays tire pressure and temperature simultaneously.  Support visual and audio alarm, air leakage alarm, overproof tire pressure and temperature alarm.


Car OBD On-board diagnostics is an automotive term referring to a vehicle’s self-diagnostic and reporting capability. OBD systems give the vehicle owner or repair technician access to the status of the various vehicle subsystems. It is a sort of computer which monitors emissions, mileage, speed, and other useful data. OBD-II is connected to the Check Engine light, which illuminates when the system detects a problem. Depending on the problem, the light either stays on, flashes, or goes away entirely. Mechanics can use scan tools to make sense of the diagnostic trouble codes, but with the right equipment and some technical know-how, you can too. You can even collect data on other aspects of your vehicle’s performance.

When it comes to both safety and convenience, mobile car electronics devices like car GPS systems, backup cameras or other car accessories can take your car to the next level. Contact your local mobile electronics professional to find out how they can help make your car as safe and as functional as possible.

Posted in Car DVD Player, Navigation map software, Portable handheld gps device | Leave a comment